762x54 question - Arms Locker
Arms Locker Gun Forum
Go Back   Arms Locker > Arms Locker > Reloading


Reply
 
LinkBack Thread Tools Display Modes
Old 07-04-2007, 12:39 PM   #1
 
Joined: Apr 2007

Posts: 30
762x54 question

because i cant find burdan primers if any one has a source please post and brass being so exspencive .is it posable to drill the primerpocket to take a shotgun primer relizing i would have to recess the outer edge of the pocket to allow for the outer ring of the shot gun primer is it posable to use ?
i would probably use light to moderate loads and maybe use them for sub sonic in a mn. can it be done ?
 
Remove Ads
Old 07-04-2007, 01:24 PM   #2
 
Joined: Jun 2004

Posts: 1,382
It would be simpler to remove the Berdan primer, remove the anvil in the case and center tap a small hole for conversion to Boxer primed.

Better yet, why not just get boxer primed cases? Google "old western scrounger" and give him a call. He has a lot of contacts that might turn up a decent source for boxer primed 7.62x54r

Mike
 
Old 07-04-2007, 04:48 PM   #3
Registered User
 BigEd63's Avatar
 
Joined: Dec 2004
From: Arkansas

Posts: 4,130
Try:

www.midwayusa.com

www.grafs.com

www.wideners.com
 
 
Old 07-08-2007, 04:11 PM   #4
Registered User
 neolithic hunter's Avatar
 
Joined: Feb 2005
From: on the back porch

Posts: 1,621
saw an artical somewhere and i can't remember where, that a guy was reloading 7.62x39, by drilling out the berdane primers while making a flash hole for boxer primers. so it mite work i don't know what size the lr berdane primers are though. if the primer cup is a little small it can be sweged to accomadate the boxer primers. if its larger then your out of luck, youl need berdane primers to reload with.
 
Reply

  Arms Locker > Arms Locker > Reloading


Thread Tools
Display Modes






Powered by vBulletin 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright © 2003 - 2011 Arms Locker. All rights reserved.