internal snapring, washer as front endcap - Arms Locker
Arms Locker Gun Forum
Go Back   Arms Locker > Arms Locker > Survival


Reply
 
LinkBack Thread Tools Display Modes
Old 10-12-2016, 04:33 AM   #1
Registered User
 
Joined: Jun 2016
From: USA

Posts: 1,430
internal snapring, washer as front endcap

of silencers was a stroke of genius, A frined of mine, John R, came up with that one. It's very easy to create, serves as a pressure release valve if something is wrong inside of the can, adds almost no weight to the can, only uses about 3/16" of space inside of the can. Threading a can's tube and making threaded end plugs is a royal pita. So weld in the rear endplug and use the snapring idea as the front endplug. Works just fine. When you're working with a can that features a sleeve tube, make the front washer (the one between the tubes) about 1/2" wide, so that if your lathe bit breaks thru the internal tube, there will still be no gas leak.
 
Remove Ads
Reply

  Arms Locker > Arms Locker > Survival


Thread Tools
Display Modes






Powered by vBulletin 3.8.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright © 2003 - 2011 Arms Locker. All rights reserved.